Best Cleaning Methods for Exposed Aggregate Driveways
Exposed aggregate driveways are a popular choice across the Sunshine Coast, from Maroochydore and Buderim to Caloundra and Noosa. The combination of natural stones set in concrete gives a durable, slip-resistant, attractive surface. But the region's warm, humid subtropical climate, regular summer rain and abundant tree cover also create ideal conditions for mould, algae, moss and staining. Knowing the right way to clean your driveway keeps it looking good and protects the surface and sealer for years.
Why Exposed Aggregate Needs Specific Cleaning Care
Unlike smooth concrete, exposed aggregate has a textured surface with small gaps between the stones. Those gaps trap dirt, leaf litter, oil and organic matter, which then feed mould and algae. Cleaning methods that are too aggressive can also dislodge the stones or strip away the sealer, leaving the driveway rougher and more vulnerable to future staining.

The goal is to remove contaminants thoroughly without damaging the cement paste that holds the aggregate in place. That means matching the method to the type of dirt, the age of the driveway and the condition of the sealer.
Common Problems on Sunshine Coast Driveways
- Black and green mould or algae: Thrives in shaded, damp areas and on south-facing driveways that stay wet longer.
- Moss and lichen: Grows in the crevices between stones, particularly under trees or alongside garden beds.
- Tannin stains: Brown marks from fallen leaves, palm fronds, flowers and fruit.
- Oil and grease: Drips from vehicles soak into porous concrete.
- Rust stains: Caused by fertiliser, irrigation water with high iron content or metal items left on the surface.
- Efflorescence: White, powdery salt deposits that rise to the surface as moisture moves through the concrete.
Method 1: Regular Sweeping and Gentle Washing
The simplest way to keep an exposed aggregate driveway in good shape is routine maintenance. Sweep weekly or fortnightly with a stiff-bristled broom to remove leaves, grit and debris before they break down and stain the surface. Follow up with a garden hose and a soft-to-medium brush every month or two.
For light grime, a mild solution of warm water and a pH-neutral detergent works well. Apply it, scrub gently with a deck brush, and rinse thoroughly. This approach is safe for sealed and unsealed surfaces and prevents buildup that would otherwise require stronger treatment later.
Method 2: Low-Pressure and Controlled Pressure Washing
Pressure washing is the most common and effective method for deep cleaning exposed aggregate, but technique matters. Too much pressure or too close a nozzle can blast out stones and erode the cement matrix, especially on older driveways where the surface has weathered.
Safe Pressure Washing Guidelines
- Start with a wide fan tip (25 to 40 degrees) and keep the nozzle at least 30 centimetres from the surface.
- Use moderate pressure, generally in the range of 1,500 to 2,500 PSI for residential concrete. Older or loose surfaces may need less.
- Test a small, inconspicuous area first to check that no stones are lifting.
- Work in consistent, overlapping passes to avoid stripes or etched lines.
- Avoid turbo or rotary nozzles unless you are experienced, as they can gouge the surface.
- Rinse all runoff away from garden beds, and keep it from flowing into stormwater drains where possible.
If the driveway is sealed, remember that repeated high-pressure washing will gradually wear the sealer down. Plan to reseal every two to four years depending on traffic and sun exposure.
Method 3: Soft Washing for Mould, Algae and Moss
Soft washing uses low pressure combined with a cleaning solution, usually a diluted sodium hypochlorite mixture or a purpose-made mould and algae treatment. It is particularly well suited to the Sunshine Coast's humid conditions because it kills organic growth at the root rather than just blasting off the surface layer.
The solution is applied, left to dwell for the recommended time, then rinsed off. Because it relies on chemistry instead of force, it is gentler on the aggregate and the sealer. Always protect nearby plants by pre-wetting them and rinsing them afterwards, and follow product instructions carefully. Many professionals use soft washing as the first step, followed by a controlled rinse to lift remaining debris.
Method 4: Targeted Stain Treatments
Some marks need more than a general wash. Treat them individually for the best results.
Oil and Grease
Soak up fresh spills immediately with absorbent material such as kitty litter or cornflour. For older stains, apply a concrete degreaser, scrub into the surface with a stiff nylon brush, allow it to dwell, and rinse with warm water. Stubborn stains may need a poultice or a second application.
Rust Stains
Use a rust remover formulated for concrete. Avoid using chlorine bleach on rust, as it can set the stain. Always test first, because some acidic products can affect coloured stones.
Tannin Stains
Brown leaf stains often lift with a pH-neutral detergent and scrubbing. Persistent tannin marks may respond to an oxygen-based cleaner (sodium percarbonate), which is gentler than chlorine and safer around landscaping.
https://cashbaqe999.alderbrief.com/posts/best-time-of-year-to-pressure-clean-your-sunshine-coast-homeEfflorescence
Dry brushing often removes light deposits. For heavier buildup, a diluted efflorescence remover may be needed. Because acids can damage aggregate and etch cement, use them sparingly and rinse well. Fix any moisture source feeding the problem, such as poor drainage, to stop it returning.
What to Avoid
Some well-intentioned cleaning habits cause more harm than good. Steer clear of the following:

- Strong acids (such as undiluted hydrochloric acid): These can etch the cement, discolour stones and damage the sealer.
- Wire brushes: They scratch aggregate and can leave rust particles behind.
- Excessive pressure: Close-range, high-pressure blasting is the leading cause of stone loss during cleaning.
- Leaving chemicals to dry: Cleaning products should never dry on the surface, as this can cause streaking or staining.
- Washing in direct midday sun: Heat causes solutions to evaporate too quickly. Early morning or late afternoon is best.
Sealing After Cleaning
A clean driveway is the ideal time to seal. A quality penetrating or film-forming sealer designed for exposed aggregate fills the pores, repels water and oil, deepens the colour of the stones and makes future cleaning far easier. On the Sunshine Coast, look for a sealer with UV resistance, since strong sunlight breaks down inferior products and causes yellowing or peeling.
The driveway must be completely dry before sealing. After a thorough clean, allow at least 24 to 48 hours of dry weather, and check the forecast, because sudden afternoon storms are common in the warmer months. Sealing over trapped moisture can cause cloudy or milky patches.
Timing and Environmental Considerations
The best time to clean is typically during the drier months, from roughly April through October, when surfaces dry quickly and you have more reliable weather for sealing. In the wet season, mould returns faster, so plan lighter maintenance washes to stay on top of it.
Be mindful of runoff. Wash water containing detergents, chlorine or removed contaminants should not enter stormwater drains, which flow to local creeks, canals and ultimately the coastline. Where possible, direct water onto lawn or garden areas that can tolerate it (rinsing plants afterwards if chemicals were used), and choose biodegradable products. Check current Sunshine Coast Council guidance and any water restrictions in force before starting a large cleaning job.
DIY or Professional Cleaning?
Many homeowners can handle routine sweeping, light washing and spot treatments themselves. Hiring a professional is worth considering when:
- The driveway is large, steep or heavily stained.
- Mould and algae keep returning despite regular cleaning.
- The surface is older, with signs of loose or missing stones.
- You want a professional-grade reseal for a consistent, long-lasting finish.
Professionals have commercial-grade equipment, can adjust pressure and chemicals to suit your specific surface, and understand how local conditions affect results. They can also advise whether minor repairs, such as stone replacement or crack filling, should be done before resealing.
A Simple Maintenance Schedule
Consistency prevents most problems. A practical routine for Sunshine Coast homeowners looks like this: sweep every one to two weeks, wash with mild detergent every two to three months, apply a mould-inhibiting treatment once or twice a year, and inspect the sealer annually. Reseal when water no longer beads on the surface, typically every two to four years.
Final Thoughts
The best cleaning method for an exposed aggregate driveway depends on what you are removing and the condition of the surface. Regular sweeping and gentle washing handle everyday dirt, soft washing deals with the mould and algae common in our humid climate, and carefully controlled pressure washing tackles deeper grime without damaging the stones. Treat stains with the right product, avoid harsh acids and excessive pressure, and finish with a quality UV-resistant sealer. With a little regular care, your exposed aggregate driveway can stay attractive and durable well into 2027 and beyond.
House Washing Sunshine Coast
(07) 5241 4915
Corrections
Spot something wrong? Send it to the desk and it gets fixed in the open.